品质不良重要度等级区分（Quality difference grade）.docVIP

品质不良重要度等级区分（Quality difference grade） Quality difference grade (I) nonconforming and nonconforming products; (1) GB/T19000-2000 defines unqualified as: not meet the requirement. Failure to include products, processes, and systems does not meet requirements, so nonconformities include nonconforming and nonconforming items. Among them, all finished and semi-finished products, raw materials, parts and pieces of product drawings, cooperative control process documents, technical standards for inspection and testing, is judged to be one or more quality characteristics (not meet) does not meet the requirements, collectively referred to as unqualified products. (2) in the whole process of product formation, due to the influence of various factors, there may be some products that do not conform to the product drawings, process documents and technical standards. At the same time, some defective raw materials, fittings, purchased parts and so on may also be purchased. If the products are judged to be not up to the specified requirements by inspection, they are not qualified. (3) one of the important tasks of quality inspection, is in the process of removing and isolating the unqualified products formed in the whole product, unqualified products timely eliminate and prevent misuse or isolation, can ensure that the error formation of unqualified products. (two) substandard classification; 1. the concept of nonconforming classification involves a great deal of quality characteristics in the process of product and product formation, and the importance of these quality characteristics varies. Disqualification is the performance of quality deviating from the specified requirements, and this deviation is different due to the difference in the quality of its quality and the degree of deviation from the specification. Unqualified severity classification, that is, the quality of the product may be substandard, according to its impact on the suitability of the product classification, lis