卧式硬支撑精密动平衡机（Horizontal rigid support precision dynamic balancing machine）.docVIP

卧式硬支撑精密动平衡机（Horizontal rigid support precision dynamic balancing machine） Horizontal rigid support precision dynamic balancing machine I. main notes The balance machine we provide is hard to support. The machine is easy to calibrate and get the best measurement accuracy. It is easy to calibrate the machine by inputting the geometry size of the rotor to be measured. Through a rotation measurement, the size and position of the unbalance can be automatically displayed by the values of grams, ounces and angles. Since we have accumulated more than 50 years of experience in manufacturing hard balance machines, we also have a lot of useful special functions that can be recommended to customers. Our machines use piezoelectric force sensors, which are more accurate than those manufactured by other manufacturers using semi rigid or electrodynamic sensors. Because of this new type of sensor, the rigidity of the balancing machine is improved and the range of use is more extensive. It is not necessary to measure the unbalance of the frame by measuring the relative elasticity of the pendulum. The use of electric or semi rigid sensor, made at the expense of the actual need of rigid frame, (need to make the rotor swing frame component size calibration in the far away from the critical speed state), and if the use of electric displacement sensor, must by measuring the swing frame to determine the amount of unbalance. If a piezoelectric sensor is used, it is no longer necessary to use an elastic component on the balancer. This means that a large balance machine can balance the rotor is very light, the accuracy of using a small balance machine to obtain the accuracy is the same, the same size in balancing machine under the condition of hard bearing balancing machine than the use range of semi hard type support is much greater. Two, technical characteristics (1) rotor restriction A. rotor quality (min max) 0.02Kg to 7.5Kg B. each side support allows weight (min max) 0.01Kg to 5Kg Maxim