常用导线载流量计算方法（Calculation method of current carrying capacity of common conductors）.docVIP

常用导线载流量计算方法（Calculation method of current carrying capacity of common conductors） Calculation method of current carrying capacity of common conductors 10 five: refers to 10 square below the line safety line size five times, such as the aluminum core wire 6 mm, his safety Flow 30A 100 two refers to more than 100 square line safe carrying capacity for wire diameter two times, such as aluminum core 150 square insulated wire safety Carrying capacity for the 300A 25, 35 and four realms: refers to the aluminum core 10 to 25 square meters of insulated wire carrying capacity for wire diameter four times, to 35 square The line in 70 square (excluding 70) is three times. 70, 95, two and a half times: refers to the aluminum core 70 square and 95 square of insulated wire for safety Two and a half times the line diameter. Wear tube, temperature, 11% off: refers to if the pipe laying (including groove plate, such as line plus protective sleeve), unknown Exposed, according to the above method, then call twenty percent off (by 0.8). If the ambient temperature exceeds 25 degrees, then dial nine after the line diameter method above Fold. To wear tube temperature of two conditions at the same time, safe carrying capacity for the above line diameter as the seven conversion with half bare refers to the same section The bare wire insulation aluminum core wire is 1.5 times the traffic safety. The copper wire upgrade calculates that the cross section of the copper conductor is raised according to the arrangement of the aluminum core line section First, and then according to the corresponding aluminum core line conditions calculation, such as: 35 square bare copper wire, a liter, according to 50 square aluminum core line formula is 50 * 3 * 1.5 = 225, namely 225 35 square bare copper wire for safety. For the current carrying capacity of copper wire, copper wire that is upgrade formula. The section of the copper conductor is raised in order according to the arrangement of sections Calculatio