FIBER OPTIC DISPLACEMENT SENSORS（光纤位移传感器）.pdf

OPERATING INSTRUCTIONS FOR FIBER OPTIC DISPLACEMENT SENSORS with Analog Output TYPE D REFLECTANCE DEPENDENT Model____________________________ Serial Nos._________________________________ PHILTEC, INC. Precision Dynamic Measurements 410-757-4404 CAUTIONS : 1. Sensor tips and fiber optic cables are provided in a variety of sizes and materials, some of which are extremely rugged and others which are very fragile. It is important to handle sensor tips and cables with care, as they are not subject to warranty replacement if broken. 2. Always ensure that the sensor tip, target area and optical path are clear and clean. Accurate motion amplitude measurements are dependent upon the precise reflection of rays of light from target surfaces. Dirt, debris and very rough surface textures can diffract and reflect light rays in unpredictable directions, thereby compromising the achievable accuracy of these devices. Sensor tips can be cleaned with alcohol and a soft cloth or tissue. REFLECTANCE DEPENDANCE TARGET % REFLECTANCE Gold Mirror 100 With reflectance dependent sensors, the analog output Mirror Polished Aluminum 85 - 90 voltage is proportional to the distance between the Mirror Polished Stls Steel 60 - 70 sensor tip and the target AS WELL AS the reflectivity of Brushed Aluminum 40 - 50 the target surface. The effect of changing target Copper Clad PC Board 45 reflectance is to shift the output