口腔修复学1（Prosthodontics 1）.docVIP

口腔修复学1（Prosthodontics 1） Can also play a role to prevent food impaction. 3.RPD abutment selection principle which P198 A: 1. abutment periodontal tissue: periodontal ligament area, root and surrounding support organizational health, dental support strong preferred abutment. 2: the size and shape of crown abutment: tall, good shape, axial crown with appropriate undercut, should be chosen as the abutment. 3:: pulp teeth as abutments well. 4: the number of abutment teeth: General abutment number 2 to 4. 5: abutment position: select a plurality of teeth, each other more dispersed better, is conducive to enhancing retention. 4. occlusal undercut preparation P210 Answer: 1. occlusal preparation in general in the near and far edge crest gap on both sides of the abutment and free, canine cingulum and incisor edge can also be set 2. if the occlusal tight or contralateral teeth or jaw elongation, occlusal wear and dentin hypersensitivity, then do not just wear teething with rest. 3. supporting concave positions should try to use the natural gap on the occlusal state, or it does not interfere with the occlusal contact at. 4. occlusal cavity should be placed on the enamel can be put on the restoration, occlusal concave bottom and the adjacent free intersection line angle rounded obtuse 5. adjustable jaw mill when necessary, but should not be too much grinding tooth. 5 card ring bending P216 1) in strict accordance with the design requirements of bending, cannot wear model of abutment. (2) the clasp arm should be curved, the elastic part should enter the appropriate undercut area, clasp body and hard parts should be located in the non abutment undercut area, and close with the abutment model, so as not to affect the position and stability. (3) the best time bending clasp, avoid the same part repeatedly bent wire clamp and the steel wire break damage. (4) the clasp arm tip should be blunt, prevent stabbed oral tissue take time to wear dentures. (5) the clasp arm tip not against a