如何提高c语言代码效率（How to improve the efficiency of C language code）.docVIP

如何提高c语言代码效率（How to improve the efficiency of C language code） How to improve the efficiency of C language code [2012-5-6 15:55:00 By:] | Master Wu Twenty-five Recommended code efficiency includes two aspects: the size of the code and code execution speed. If the code is concise and fast implementation, we can say that the high code efficiency. In general, the streamlined code correspondingly put up. MCU ROM and RAM space is very limited, when you encounter programming MCU ROM and RAM not enough time, or your program requires a higher execution speed, we have to face the problem of solving the efficiency of code. How to improve the efficiency of code? The author is in a LED flash program to investigate cases with you. I ncludereg52.h// contains the header files Sbit led=P2^0; / / a variable definition of LED, the associated pin of the microcontroller P2.0 Void Delayms (unsigned int t); / / statement delay function Int main (void) / main function (entrance program C language function) { While (1) { Led=0; //P2.0 low light LED Delayms (500); / / call delay, delay of 500 milliseconds Led=1; //P2.0 high off the LED Delayms (500); / / call delay, delay of 500 milliseconds } Return 0; } Void Delayms (unsigned int t) / / definition of delay function { Unsigned int i, j; For (i=0; it; i++) For (j=0; j120; j++); / / about 1 millisecond delay } This is the light flashing LED C source code, the source code is 67 bytes in the Keil code generated by uVision4. Here we have used several methods to improve the efficiency of the program. A local variable is defined as far as possible. The global variables of the microcontroller program is usually placed on the common data memory (RAM), and the local variable is usually placed on the special function registers. Register data faster than RAM data, if the call is a global variable will generate several code in a local function. So, less the definition of global variables, local variables defined. As the above example, if the I and j in