三菱变频器故障代码 文本文档（MITSUBISHI inverter fault code text documentation）.docVIP

三菱变频器故障代码 文本文档（MITSUBISHI inverter fault code text documentation） The operation display panel E.OC1 Over current acceleration The name of a current cut off acceleration The content of accelerating operation, when more than 230% inverter output current exceeds the rated current, the protective circuit, stop the inverter output. Check points The 1. is speeding up operation. 2. for the lifting of the accelerated decline of time. If there are 3. output short circuit and grounding phenomenon. Although 4. is the nominal frequency of the motor is 50Hz, but the Pr.3 reference frequency setting value is 60Hz. 5. stall prevention action is appropriate. 6. regeneration frequency is too high. (the regeneration of output voltage is V/F than the standard value, whether because the motor current increases over current.) Handle 1. extended acceleration time. (shortened for lifting down acceleration time.) At the start of 2. E.OC1 is always light, please try to disengage the motor starting. If E.OC1 is still light, please contact the dealers. 3. confirm the connection is normal, to ensure that no output short circuit and grounding. 4. please Pr.3 reference frequency is set to 50Hz. (refer to page eighty-fourth) The 5. stall prevention set to the appropriate value. (refer to page Seventy-eighth) 6. please set the benchmark voltage in the Pr.19 reference frequency voltage (rated voltage of the motor etc.). Reference: MITSUBISHI inverter manual Display E.OC1 Name: accelerated overcurrent protection Content: to accelerate the operation, when the inverter output current reaches or exceeds about 200% of the rated current, the inverter output circuit protection action, stop. Check whether speeding up operation. Output is short circuit, earthing. Treatment: prolonged acceleration time Display E.OC2 Name: in the constant current circuit breaker Content: the constant speed operation, when the inverter output current reaches or exceeds about 200% of the rated current, the inverter output circu