化工原理课后答案(中国石化出版社) 第8章 传质过程导论（After the principle of Chemical Engineering (Sinopec Press) eighth chapter introduction of mass transfer process）.docVIP

化工原理课后答案(中国石化出版社) 第8章 传质过程导论（After the principle of Chemical Engineering (Sinopec Press) eighth chapter introduction of mass transfer process） This paper contributed by tiger2100. Doc document may at the WAP end of the browsing experience poor. Suggest you select TXT, or download the source file to the machine view. The eighth chapter The mass transfer process introduction The eighth chapter The mass transfer process introduction 1. CCl containing 4 steam air, by 101.3kPa (must) and 293K compression to l013kPa (absolute) after cooling condensation, measured under 313K started CCl 4 mixed gas condensation, the temperature of condenser for 300K: (L) before and after compression to compression condensation before and condenser, CCl 4 steam quality ratio, mass ratio and molar concentration. (2) the percentage of CCl 4 condenser steam condensation. The saturated vapor pressure data of carbon tetrachloride are as follows: 273283288 T /K 29389.830012331321 Note: P / mmHg 33.7 1mmHg = 133.3 p a Zero Fifty-five point six Seventy-one point one Solution: (1) l013kPa, 313K (must) start CCl 4 is condensed, 210 x 101.3760 y= 0.0276 = 0* 154 = 0.131 before compression: a = 0.0276 * 154 + (10.0276) = 0.15 x 290.0276 x 154 a= (10.0276) YP 0.0276 x 29 x 101.3 = C= = 1.15 * 103 KMOL / M 3 RT 8.314 x 293 compression after the start of the pre condensation: a = 0.131, a = 0.15 YP C= = 0.0276 * 1013 = 1.07 * 102 KMOL / M 3 RT 8.314 x 313123 x 101.3760 condenser: y = = 0* 154 = 0.0162 A = 0.080 + 0.0162 * 154 * 290.0162 * 154 (10.0162) a= (10.0162) * 29 = 0.087 Page first The eighth chapter The mass transfer process introduction YP 0.0162 x 1013 = = 6.58 * 103 KMOL / M 3 RT 8.314 a 0.087 A0.15 x 300 x 100% = 42% (2 * 100%) = a 0.15 C= The balance between the 2. sulfur dioxide and water at 30 DEG C: a (kgSO2 / 100kgH 2 O 0.1 0.2 0.3 0.5 0.752 1.079) 1.5125 4.7 11.8 19.536 for a total pressure of 101.3kPa (must) x under y, and mapping. P / mmHg A p 64 I and y = x, y data