知点记录（Knowledge record）.docVIP

知点记录（Knowledge record） 1. how to install the IE plug-in HKEY_CURRENT_USER\\Software\\Microsoft\\ after registration is disabled through the registry, 2008-02-17 at 13:16 in the registry The following is a list of Windows\\CurrentVersion\\Ext\\Settings series CLSID, it is forbidden to delete a CLSID plugin for CLSID., the corresponding state variable for the disabled from the plug-in enabled. Available management add (you may need to restart this function to reflect recent changes to the view) to the change. 2., Netsh, int, IP, reset, c:\tmp.txt (that is, Netsh int IP reset c:\tmp.txt in the run) (same as reloading TCP/IP) Access-enable allows routers to create temporary access list entries in a dynamic access list Access-group applies the access control list (ACL) to the interface Access-list defines a standard IP ACL Access-template manually replaces the temporary access list entry on the connected router Appn sends commands to the APPN subsystem Atmsig executes the ATM signaling command B manual boot operating system Bandwidth sets the bandwidth of the interface Banner MOTD specifies date information slogans Bfe sets the emergency event manual model Boot system specifies the system image to load when the router starts Calendar sets the hardware calendar Cd change path The Cdp enable allows the interface to run the CDP protocol Clear reset function Clear counters clears the interface counter Clear interface restarts the piece logic on the interface Clockrate sets the clock rate of the serial hardware connection, such as the rate at which the network interface module and the interface processor can accept Cmt opens / closes the FDDI connection management function Config-register modify configuration register settings Configure allows you to enter the existing configuration pattern and maintain and save configuration information on the central site Configure memory loads configuration information from NVRAM The Configure terminal is manually configured from the termi