叫号机维修知识（A machine maintenance knowledge）.docVIP

叫号机维修知识（A machine maintenance knowledge） Debugging and troubleshooting of queuing hardware and queue management system Release date: [2010-11-8], read [102] times Debug, Testing principle: when testing or querying the cause of a fault, you can use the segmentation test, the substitution and the elimination method to check the trouble or debug the system. For example, if a pager cannot be logged in, we can test it from hardware to software, from the module of the network cable to the setting of the COM port, and at the same time determine what part of the problem is by substitution and elimination. The specific operation is: first check the pager address code is dialed, then check the crystal head and the module connection is normal, from the module to the network software interface is normal, the software interface is normal, while another call are not normal, if these are normal, then remove hardware the problem; look at software settings, COM port settings are corresponding project etc.. After this reason is determined, then according to the reason to take the solution. 3.4.1 about pagers, 3.4.11 principle: Connected with the computer in the cabinet, the computer outputs 232 signals to the software interface by the COM port, and the software interface outputs 485 signals to the calling device. Among them, the transmission signal of over five kinds of eight core wire netting is defined as: 1, 2, the line is power positive, 7 and 8 lines are negative power, the 3 line is signal A+, and the 6 line is signal B-. The calling devices between the windows are connected by a network cable, each window is connected in parallel, and the line is not interrupted when the window is playing the module. 3.4.12 debugging: The pager address code by dial window (address dialing method reference teller training 4, queuing system, and then according to the application software interface) connected with the COM port, the pager set corresponding to the COM port, for example, the softwar