pps材料性能（PPS material properties）.docVIP

pps材料性能（PPS material properties） PPS material, PPS, English name is Phenylene sulfide. PPS material density: 1.36g/cm3 molding shrinkage: 0.7% molding temperature: 300-330 DEG C drying conditions: - --- I. material performance 1, electrical insulation (especially high frequency insulation) good, white hard and crisp, fell to the ground with metal sound, light transmittance second only to organic glass, coloring, water resistance, good chemical stability. Excellent flame retardancy, non flammable plastic. 2, general strength, rigidity is very good, but the quality is crisp, easy to produce stress embrittlement, not benzene, gasoline and other organic solvents. Long-term use temperature of up to 260 degrees, in 400 degrees of air or nitrogen to maintain stability. By adding glass fiber or other reinforced materials after modification, can greatly improve the impact strength, heat resistance and other mechanical properties are also improved, the density increased to 1.6-1.9, mold shrinkage to 0.15-0.25% suitable for the production of heat-resistant parts. Insulation and chemical equipment. Optical instrument and other parts. Two, forming performance 1. amorphous material, moisture absorption is small, but should be dried after molding. 2., liquidity between ABS and PC, solidification fast, small contraction, easy to break down, the use of higher pressure and speed. Mold temperature is 100-150 degrees. The main channel taper should be large and the runner should be short. The range of application can be generally applied to the manufacture of PPS pipes, PPS materials and other materials, which are mostly used in construction and home furnishing PPS material characteristics and advantages: ultra high temperature, dimensional stability, deformation, electrical performance is excellent, chemical resistance, fire retardant, electrical insulation performance, arc resistance is good. PPS material long-term resistance to temperature RTI can reach more than 200 degrees, thermal