变电站的设备（Substation equipment）.docVIP

变电站的设备（Substation equipment） Abstract: box type substation has been widely used in distribution network, but there are many disadvantages in the construction of box type substation on the central high density area of city center. According to the demand of the power supply department, this paper expounds the design of prefabricated underground box type substation, including the selection of electrical equipment, precast concrete shell, ventilation and waterproof. Thesis bar Key words: Prefabricated underground box type substation ventilation and waterproof papers Lwba.net 1. foreword content comes from lwba.net 3. civil engineering part Get your paper for your paper Prefabricated underground box in the factory is made to installation site, and the site reserved for import cable docking, complete waterproof plugging cable reserved hole, the manhole seal is fixed, can be put into formal operation. The prefabricated underground box can be installed under the road and the flower bed, which not only makes good use of the abundant underground space resources, but also meets the municipal planning requirements of some special environments and the demanding time limit for the construction. Lwba.net The underground box is divided into a split structure composed of a box body and a case cover. Box structure: the box is a rectangular box with ears on both sides. The box size is 2500mmx 2900mm long, 3700mmx wide, and the weight of the case is about 13 tons. The box body is made up of reinforced concrete, the box wall is 100mm thick, the concrete adopts waterproof concrete, and the multifunctional compound agent is added into the concrete to make the concrete with high strength, high impermeability, high durability and crack resistance. The inner space of the box is divided into two parts: the equipment layer and the interlayer. In the box reserved on the ladder, the ladder can be extended by design, maintenance personnel can be arranged in the box cover through the activities o