钢结构实用知识（Practical knowledge of steel structures）.docVIP

钢结构实用知识（Practical knowledge of steel structures） A book is better than a book without hope 1. design of a steel frame filled wall, using SATWE calculation, calculation of wind load and wind load calculation calculation of the two results is very large, very confused, but I feel no frame wall filled with wind only Liang Zhu, wind load calculation is very small, very small and do not calculate the difference it is so, please explain why? Answer: no steel structure filled with wall the only used for calculation of wind-induced vibration coefficient, wind or considering the whole wall full windshield to consider; if your structure is an open type structure, can modify the shape coefficient of beam column members according to your solidities, translating into the wall wind, or manually modify the effect of wind load. 2, what is hot rolling, what is cold rolling, what is the difference? Answer: hot rolled steel roll out in more than 1000 degrees, usually in small 2MM thick, the thermal deformation of high speed machining of steel is not worth to steel increasing area of heat dissipation, which is difficult to temperature above 1000 degrees to processing, had to sacrifice this cheap, hot processing method, rolling at room temperature that is, hot rolled and cold rolled, to meet the market demand for thinner thickness. Of course, cold and bring new benefits, such as hardening of the steel strength, but is not suitable for welding, welding at least work hardening is eliminated, high strength and no return to the hot, the strength of the material, cold-formed steel used in hot material, such as pipes, can also be used cold rolling material, cold rolling or hot rolling material 2MM thick material, is a criterion of hot rolling of the thin 2MM thick cold rolled material thickness 3MM. 3. How long is the length of high-strength bolts? Answer: high strength bolt, screw length =2, connecting end plate thickness + a nut thickness, +2 washer thickness, +3 wire length. 4. The problem