高压包原理（High voltage package principle）.docVIP

高压包原理（High voltage package principle） First, the role of high pressure package. High pressure package name is the output transformer, also known as luggage or change, the working principle of high pressure bag display and TV are basically the same, the main function is to generate the anode voltage, also provides the focus and accelerate, from gate voltage. Note that the energy provider for deflection current is not the high voltage package, but the S correction capacitor. When the line is cut off, the B+ voltage charges the S capacitor through the high voltage package and deflection coil, and the current is only passed through the high voltage package. Because the high voltage package work in high temperature, high frequency, high voltage, high current status, coupled with external humidity or dust and other factors, the probability of high pressure package damage is higher. Two, cause high pressure package damaged lesions. 1 、 high voltage filter capacitor breakdown. 2 、 inter turn short circuit of high voltage coil in package. 3 、 leakage or breakdown of high voltage silicon stack in package. 4, the first coil in the package short-circuit 5, the focus of components in the package aging, so that the focus and acceleration voltage instability. 6, the insulation performance of the package is decreased, so that the high pressure bag is fired internally or externally. Three. Key words and technical terms relating to high pressure packages. 1, HV - anode high voltage. As the display size is different, the HV voltage is also different. Usually 14/15 inch machine HV value is 24KV to 25KV; 17 inch machine is 27KV to 29KV, 19 inches and 21 inches machine is 30KV to 35KV. 2, FV - focus voltage, sometimes referred to as G4. The FV voltage is usually obtained at the HV end with a potentiometer divider, and the voltage is from 3KV to 9KV. If it is double focusing, it is divided into FV1 and FV2, in fact, there are more than one set of potentiometers. 3, SV - accelerating pole