硬盘修复的物理办法（Physical methods for hard disk repair）.doc

硬盘修复的物理办法（Physical methods for hard disk repair） Can be repaired on the verge of scrap hard disk repair? You try! Can be repaired on the verge of scrap hard disk repair? You try! Many people will be scrapped when they fail to find a hard disk or error in BIOS. In fact, if you turn on the computer, you can listen to the hard disk when you turn on it To disk rotation sound, it is estimated that the main motor and control circuit board is no fault, there is still room for redemption. It should be noted that the hard disk is a kind of Precision devices, very fragile, maintenance should first wash both hands, release the remaining static electricity of the human body, and then operate. Unable to find the disk For the hard disk with the HDD Not Detected error, first check whether the interface of the external data signal line of the hard disk is deformed, The existence of weld interface of solder joint. After removing the above possibility, remove the back cover of the hard disk and expose the circuit control panel. Unscrew the retaining screws on the control panel The control panel is separated from the hard disk main body. You can see the two rows of spring pieces of the hard disk body. One line serves as the main motor, and the other line serves as the main line A magnetic head, a mechanical arm, a driving coil, a power supply, and a data transmission interface between the hard disk main body and the circuit control board. For hard drives without special packages You can often see the spring and the control circuit board corresponding parts are dust. Clean the part of the spring sheet with absorbent cotton dipped in anhydrous alcohol Correction of the shape and removal of the oxide layer may normally return to normal. If the above process is not valid, then the main body of the drive must be turned on. Select a very dusty environment and unscrew the screws on the front cover of the hard disk With glue). Remove the front cover of the hard disk and see the disk clearly.