第4章+时钟电路（Fourth chapter + clock circuit）.doc

第4章+时钟电路（Fourth chapter + clock circuit） This article is contributed by QSelf-study mobile phone maintenance, network training Gao Shifu QQ 609720468, QQ:609720468 Fourth chapters Clock circuit in GSM mobile phone 26M clock is very important in mobile phone, it is equivalent to the time of our life in Beijing. If the frequency deviation is too large, do not start, frequency is small and no signal. Therefore, quartz crystal oscillating circuit with higher accuracy is adopted. First, the focus of this section. 1, understanding the types and functions of mobile phone clock. 2. Types and differentiation of mobile phone crystals. 3 、 understanding of circuit structure and working principle. Two, circuit analysis. 1, mobile clock categories and functions. There are two clocks in GSM phones: 32.768KHZ and 26MHZ. NOKIA 38.4MHZ, and with the increasing number of mobile phones, the frequency of the main clock is also increasing! 1) 32.768KHZ clock: composite mobile phone sleep when the real-time clock, also known as the secondary clock. Provide us with time display. At the same time, in order to save power, when the phone is in standby, the 32.768KHZ provides a running clock to the CPU (as shown below), the main clock intermittently works during standby. Power IC power supply, VRTC auxiliary clock backup battery, crystal 32.768KHZ CPU Display (real time clock circuit) 2) 26MHZ clock: 26M clock is very important in mobile phone. If the frequency deviation is too large, do not start, frequency is small and no signal. Therefore, quartz crystal oscillating circuit with higher accuracy is adopted. The main function of 26M clock in mobile phone is: First page For more content, please click enter: mobile maintenance video teaching network Teach yourself mobile phone maintenance www.shoujipeixun. Com network training Gao Shifu QQ 609720468, QQ:609720468 A) amplified and sent to CPU as the running clock (tube boot). B) send the oscillator circuit as a frequency reference (p