数控车床gm指令（NC lathe GM instruction）.doc

数控车床gm指令（NC lathe GM instruction） The G code prepares the function code; the M code is the auxiliary function code. Code function G code Code name - function Brief G00------ rapid positioning G01------ linear interpolation G02------ clockwise circular interpolation G03------ counterclockwise arc interpolation G04------ timed pause G05------ through the middle point arc interpolation G07------Z spline interpolation G08------ feed acceleration G09------ feed deceleration G20------ subroutine call G22------ radius size programming mode G220----- system operation interface G23------ diameter programming G230----- system operation interface G24------ subroutine end G25------ jump processing G26------ cycle machining G30------ magnification cancellation G31------ magnification definition G32------ equal pitch thread cutting, inch G33------ equal pitch thread cutting, metric G53, G500- sets the workpiece coordinate system to be canceled G54------ sets the workpiece coordinate system one G55------ sets the workpiece coordinate system two G56------ sets the workpiece coordinate system three G57------ sets the workpiece coordinate system four G58------ sets the workpiece coordinate system five G59------ sets the workpiece coordinate system six G60------ accurate path mode G64------ continuous path mode G70------ inch inch G71------ metric size mm G74------ return reference point (machine zero) G75------ returns the zero point of the programming coordinate G76------ returns the starting point of the programming coordinate G81------ external circle fixation cycle G331----- thread fixed cycle G90------ absolute size G91------ relative size G92------ prefabricated coordinates G94------ feed rate, feed per minute G95------ feed rate, per turn feed Function explanation G00 - quick positioning Format: G00 X (U) __Z (W) __ Instructions: (1) the instruction moves the tool rapidly to the specified position according to the point control mode. The workpiece must not be removed during mo