材料成型（Material forming）.docVIP

材料成型（Material forming） This article is contributed by m736764398 DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. 1. factors affecting the plastic deformation: solute atom, grain size, phase, grain size and solute solute atoms influence, 2. from dislocation dislocation strengthening mechanism of steel by adding alloy elements on plastic deformation dislocation or easy proliferation, easy decomposition, improve work hardening ability, steel approaches are: grain refinement, the formation of second phase particles and grain refinement, the formation of second phase particles, grain refinement in quenching effect, quenching effect, reduce the stacking fault energy characteristic of chemical composition of steel 3. common low alloy components: low carbon low alloy low carbon low alloy elements, main alloying elements Mn, adding alloy elements Al V, Ti, Nb, Au nouns explain: corrosion occurred in the local area of the corrosion of the metal surface corrosion damage phenomenon of Carburized Steel Surface Carburizing for low carbon steel after heat Strengthening treatment, improve the performance of steel carburizing steel on the surface of the solid solution strengthening, solid solution formation is steel strength and hardness increase in solid solution strengthening of pearlite, ferrite and cementite in pearlite: mechanical mixture of two hardened steel in hardness after tempering with tempering temperature rise two hardening decreased but, in a tempering temperature, the hardness increases, and at a temperature peak phenomenon of cold brittle: temperature below a certain temperature, the plastic material becomes brittle brittle redhardness: just heated case, To maintain a high hardness and wear resistance of redhardness precipitation strengthening by saturated solid solution and precipitation efficiency processing body precipitation hardening alloy strengthening phase