活性白土烘干生产工艺和设备优化设计方案（Optimized design process of activated clay drying process and equipment）.docVIP

活性白土烘干生产工艺和设备优化设计方案（Optimized design process of activated clay drying process and equipment） Optimized design process of activated clay drying process and equipment 5-19 In recent years, with the use of activated clay more and more widely, the market has shown a good momentum of development. Activated clay is not a big industry, but also an international margin. Therefore, unlike cement and metallurgical industry, there are special equipment, the production process is also no specification. Many of the market stereotypes do not apply. And many activated clay plants precisely because of inefficient production equipment, equipment running costs and product quality and other issues, can only maintain production, only a small number of profits. As a result, the new activated clay production enterprises were forced to seek equipment with high production efficiency and advanced technology. Huoxingbaitu drying production optimization design to meet the first to produce competitive products, then the investment, operation and maintenance of mechanical equipment of low cost, high labor productivity, and to take into account the working conditions and environmental protection. In short, the cost of production is low. Activated clay is mainly used in petroleum catalysis and decolorization of mineral oil, vegetable oil and so on. It is made of high-grade bentonite finished products such as sulfuric acid activation treatment, rinse, solid-liquid separation, drying, grinding and other processes. It is the main quality parameters: activity, decolorization rate, free acid content, etc.. Huoxingbaitu after solid-liquid separation, the water content is 30 ~ 45%, it has strong viscosity, enters the drying machine, drying machine if the structure is not suitable, not only difficult to dry, and very easy to produce bulk materials about 100mm. If the temperature is too high will make the crystal drying machine, montmorillonite products lose too much water, then the activity decreased ser