浅谈渠道测量的工作步骤（Talking about the working steps of channel measurement）.docVIP

浅谈渠道测量的工作步骤（Talking about the working steps of channel measurement） The channel is a water diversion project, which consists of a canal head, a canal, a aqueduct, an inverted siphon, a culvert, a control gate, a bridge and a series of supporting structures. The central location and characteristic elevation of these buildings should be measured according to a certain standard, so as to provide sufficient measurement data for channel design. Channel measurement, are on the ground along the selected center line and its two sides by longitudinal and cross section, and map, in order to draw map line design; then, engineering quantity, budgeting or budget, or as the basis for construction scheme comparison. The investigation and layout of canal engineering is closely related to the engineering design. Only in the field of laying line location and accurate measurement data on the basis of local conditions to make reasonable engineering design. According to the actual work experience, the following talk about the general measures and points for attention of channel measurement work. 1. job preparation meeting The preparatory meeting will be held prior to the start of the measurement. Party As Representative (who is responsible for the construction section of the first party), the surveyors and the designers shall attend the meeting. The purpose of the meeting is to clarify the tasks and specific requirements of this channel survey and to be relevant to the future design. First of all, it should be clear whether the new channel or reconstruction channel; if the converted channel has changed the line segment or cut curved straight channel section. Whether the channels have geological data or similar projects can be used for the geological data of this channel project. If there is no relevant geological data available, it is necessary to make clear the geological location of the central location along the channel and the proposed major building. At the meeting, Party A shall a