涂料分析（Coating analysis）.docVIP

涂料分析（Coating analysis） China coatings Online W A rapid method for the analysis of coating composition -- pyrolysis gas chromatography / mass spectrometry Cao Jingyi, pay the sea, Zhang Feng, Yang Guangfu (naval coatings analysis and inspection center, Naval Equipment Research Institute, Beijing 100072) Abstract: pyrolysis gas chromatography / mass spectrometry is used to determine the composition of coatings. It is suitable for all kinds of coating samples and avoids the infrared and nuclear reactions The complex and lengthy separation steps, such as magnetic and chemical separation and purification, can be qualitatively determined. The sample has no pretreatment, less dosage and high sensitivity, The spectrum is simple and the analysis cycle is short. It can not only determine the large range of paint base and solvent, but also make a detailed description of each kind of resin Analysis and detection. Keywords: pyrolysis; gas chromatography / mass spectrometry; coatings; base materials; solvents 0 Introduction Coating is the main material for corrosion protection of ships steel structure. The quality of coating directly affects the navigation and combat effectiveness of naval ships. With the development of the national economy Coatings are widely used in naval ships for their unique protection, decoration and other special functions. The evaluation of coating quality in China is based on general practice Test methods, such as determination of adhesion, flexibility, impact resistance, solids and salt fog, aging, soaking, etc.. There are many coatings manufacturers in China , It is of great practical significance to find a method to monitor the quality of coatings by using a long time. With the development of coating industry, the importance of large-scale precision instruments is becoming more and more prominent. A variety of large-scale analytical instruments have been widely used in coating products, especially Analysis and identification of composition of coating