PLC皮带运输监控系统设计.docVIP

毕 业 设 计 [论 文] 题 目： 基于PLC的皮带运输监控系统设计 学 院： 专 业： 姓 名： 学 号： 0 指导老师： 完成时间： 2013.05.28 摘 要PLC）作为控制核心，整个系统采用了一台PLC控制4台皮带机，整个控制系统设一个控制室。利用PLC控制皮带输煤机，实现了逆序启动、顺序停止、故障停止、紧急停止的功能，并且有手动控制和自动控制两种控制方式，从而实现了输煤系统的自动化功能。 PLC由于采用现代大规模集成电路技术，采用严格的生产工艺制造，内部电路采取了先进的抗干扰技术，具有很高的可靠性。此外，PLC带有硬件故障自我检测功能，出现故障时可及时发出警报信息。在应用软件中，应用者还可以编入外围器件的故障自诊断程序。 关键字：可编程序控制器，皮带输送机，自动化 Abstract This system is the requirements of monitoring design of belt conveyor, then I have to transport coal as examples. Design of belt conveyor control system is a very traditional subject, now with many control instruments of various advanced precise appearance, design of belt conveyor control is also more and more advanced, more and more perfect, various references is also beyond count. The system uses Mitsubishi FX2N series programmable controller (PLC) as the control core, the system uses a PLC control 4 belt machine, the whole control system sets up a control room. Use PLC to control the belt conveyer, realizes the reverse start, stop, failure to stop order, emergency stop function, and a manual control and automatic control two control mode, so as to realize the automatic function of the coal handling system. PLC due to the use of modern large scale integrated circuit technology, used the strict production craft manufacture, the internal circuit has adopted the advanced anti-jamming technology, with high reliability. In addition, self - detection function with PLC hardware failures, failure to issue timely warning information. In the application software, users can also fault self diagnosis program of peripheral devices. Keywords: programmable controller, belt conveyor, automation  目录 摘 要 I Abstract II 1绪论 1 1.1 国内外皮带运输机的研究现状 1 1.2 课题的研究目的 1 1.3系统控制要求 2 1.4 研究