质量事故分析（Quality accident analysis）.docVIP

质量事故分析（Quality accident analysis） Discussion on safety quality of building structure Quality accident analysis of a project Abstract: the building structure directly affects the safety of buildings, due to design or construction and other reasons, resulting in quality accidents in buildings. Through the analysis of the quality accident caused by the lack of concrete strength of the bottom frame structure of a commercial building, a reasonable reinforcement design scheme is put forward. The practice shows that the reinforcement effect has been achieved Key words: engineering quality, quality accident, frame structure, concrete strength grade, strengthening Introduction： Building structure directly affects the safety of buildings, because of the design or construction and other reasons, resulting in building quality accidents, and even collapse, has occurred frequently in china. Each project should ensure both safety and economic rationality, which requires correct design ideas, efforts to study design theory, and should be familiar with and able to deal with various practical problems arising in construction. The following is a commercial building quality accident analysis. General situation of engineering: The 5 # residential building project of a Real Estate Company to develop the sunshine garden, the bottom frame, 2 ~ 5 layer for masonry structure. The total building area is about 5600 m2, building a total length of 61.44 m, depth 13.14 m; 4.50 m bottom storey masonry structure, part of the height of 2.9 M; the bottom frame structure design of concrete strength grade construction to the main structure of the project C25 three layer, found the bottom frame structure beam, column concrete strength is not up to the design requirements. Figure 1. Fig. 1 plane sketch of beam column reinforcement The local Municipal Quality Supervision Station Testing Center conducted a comprehensive inspection on the rebound bottom frame beam and column bottom frame structure concrete