金属材料表面改性涂层的新进展(专业课)（New developments in surface modification coatings for metal materials (specialized courses)）.docVIP

金属材料表面改性涂层的新进展(专业课)（New developments in surface modification coatings for metal materials (specialized courses)） Radio examination ---------------------------------------------------------------------------------------------------- 1., the influence of technological parameters on the absorption rate of alloy elements is large or small, and the correct arrangement is (). Correct answer: B., workpiece voltage pole spacing source voltage air pressure 3. following is the quantitative test method of binding force The correct answer: D. tension method 5. laser cladding ceramic coating does not include (). Correct answer: D. metal wear resistance 6. which of the following is not an application of cladding technology?. The correct answer: B. anti-aging coating A multiple-choice question ---------------------------------------------------------------------------------------------------- 1. the following description of erosion corrosion is correct. The correct answer: A. referred to as erosion, is the material in the synergistic action of stress and chemical materials under the premature failure of the phenomenon, B. in oil, chemical industry. C. exposure to the fluid of many types of equipment, such as slurry pump flow components of elbow, three links and the heat exchanger tube is widely existed in the process of hydropower, will suffer the destruction of erosion of D. phase flow in solid phase particles in the double, the damage is more serious, it greatly reduce equipment life 2. the following description of the objective requirements for good cladding is correct. Answer: B. cladding materials and substrate melting point between the two close, to ensure the maximum dilution of C. cladding layer and the substrate to avoid the formation of brittle phase, in order to ensure the high interfacial bonding strength of D. two materials have certain plasticity, in order to compensate the thermal stress, ensure interface crack formation 3. which of the following is the applicati