皮带轮设计（Pulley design）.docVIP

皮带轮设计（Pulley design） Pulley design Characteristics of belt pulley drive: The advantages of belt drive include: belt wheel transmission kinetic energy, easing load impact; belt wheel transmission operation The utility model has the advantages of smooth structure, low noise and low vibration; the structure of the belt pulley drive is simple and the adjustment is convenient; the belt pulley drives the belt pulley to drive For the manufacture and installation of pulleys, the accuracy is not as strict as the engagement drive; the belt drive is overloaded The function of guarding is that the center distance of two axles driven by belt pulley is larger. The disadvantages of belt drive are: The belt pulley has elastic sliding and slipping, low transmission efficiency and poor drive ratio; When the belt pulley transmits the same large circumference force, the contour size and the axial pressure are bigger than the meshing drive; The life of belt pulley is shorter. Classification of pulleys: The belt drive mainly has: flat belt, triangle belt, synchronous toothed belt three kinds, three kinds of belts all have national label Accurate, but the belt pulley due to the transmission ratio, power changes, there is no corresponding national standards or national standard Should not cover all the contents, but the national standards determine the scope of selection, the use of conditions, design methods and so on. In addition, a standard similar to the national standard is numbered ISO 1081-1995. The belt drive and V-belt are specified Specifications for the selection and design of the belt with triangular belts and grooved pulleys. Divided into SPZ, SPA, SPB, SPC, Model SPD five kinds of pulleys. Advantages and disadvantages of three kinds of pulleys: Flat belt is a kind of belt. Including ordinary flat belt, woven belt, composite flat belt, high-speed belt and so on. The common flat belts are made of sticky canvas with several layers of glue, and there are two kinds of edging and o