锅炉调整（Boiler adjustment）.docVIP

锅炉调整（Boiler adjustment） The idea of boiler steam temperature regulation Steam temperature is one of the main parameters of monitoring and adjusting to boiler safety and economic operation, because the influence factors of steam temperature, process complex, adjustment process with large inertia, which requires the steam temperature regulation should be handling the analysis, observation, establish advance regulation ideas. When the unit working condition changes, we should strengthen the monitoring and adjustment of the steam temperature, analyze the relationship between the influencing factors and changes, and explore some experience of steam temperature regulation to guide our adjustment operation. Below, we analyze some typical working conditions and put forward some guidance measures. Because of the complexity of steam temperature changes, we should combine the actual situations to be flexible in the application process, can not be alive. Regulation of steam temperature in normal operation of the unit The steam temperature regulation can be divided into the adjustment of the smoke side and the adjustment of the steam side. The adjustment process of the smoke side is of great inertia, while the regulation of the steam side is relatively sensitive. Therefore, in the process of the normal operation, should keep the temperature reducer has a certain opening degree, the general should be more than 7%; if the desuperheater is closed or the end opening is very small, should be adjusted in time of combustion (may be appropriate to increase the volume, or try to make the flame center move), the steam temperature rise, desuperheater open in the process, appeared in the soot blowing steam temperature is low, should first stop blowing; the steam temperature rise stability after considering whether to continue blowing. If the temperature difference of the thermostat is larger (if more than 60%), it should also be adjusted from the combustion side, or blowing the furnace, to