丝网印花的10种常见工艺（10 common processes of screen printing）.docVIP

丝网印花的10种常见工艺（10 common processes of screen printing） A slurry, water slurry printing printing technology is one of the most basic printing screen printing industry, its in cotton, polyester, hemp and so on, almost all the light background of fabric printing, a wide range of applications. Its working principle is similar to that of dyeing. The difference is that it is used to dye a region of a fabric into the color needed for the flower position. Therefore, this process can not be applied to the deep base fabric. The advantages of slurry printing process is the most widely used, take a good fastness, with a relatively low price made good effect. The limitations of slurry printing process can not be applied in all dark fabric. Two, glue printing process Paste printing process applies special chemical gel and highly seamless blending of dyes. Dye through the function of medium gel, firmly attached on the fabric, glue printing process overcomes the limitation of water slurry printing. Its characteristic is to adapt to a variety of deep color and material printing, it can be blended in cotton, linen, rayon, polyester, nylon, polypropylene, polyvinyl chloride and various kinds of fiber fabric printing, also can be used in the leather, artificial leather and other materials printing, it can be used for fluorescent printing, ink-jet printing, printing, burnt out electrostatic flocking printing and other printing process. The biggest advantages of mucilage printing process is widely used, beautiful colors, high reduction degree, but its relative water slurry printing process printing process is more complex, the cost is relatively high. The emergence and extensive application in cement slurry, because its coverage is very good, also can make the dark clothes printed on any light, but also a certain degree of gloss and stereo feeling, make clothes look more upscale, so it quickly spread, almost every piece of printed T-shirts will use it. But because it has a certain hardness