豪华版（Deluxe Edition）.docVIP

豪华版（Deluxe Edition） Boiler safety regulation I. General Provisions The seventh leaders at all levels are not allowed to violate the rules issued explicitly. The staff in violation of the rules by the streets, should refuse to self. Any staff in addition to their own strict implementation of the rules, should supervise the surrounding personnel comply with the rules. If there is a violation of the rules, and to personal and equipment safety crisis that should stop immediately. The twelfth production workshop inside and outside the workplace. Well. Pit hole or trench, must be flush with the ground covered with a strong cover. In maintenance work for the cover removed, must set up a temporary fence. The temporary hit hole. After the construction, must be restored. Thirteenth all hatches. The size of holes. The stairs and platforms. Must be equipped with the guard plate is not less than 1050mm high bar and not less than 100mm high. As in the maintenance period should be removed when the railing, must be installed in the temporary block, and maintenance at the end of the railings immediately put back to the original height. The bars of 1000mm can be changed. Fourteenth, all stairs, platforms, railings should be kept intact. Iron plate must be laid firmly. The surface of iron plate should be lined to prevent slipping Fifteenth. Entrance channel. The stairs and platforms, are not allowed to put debris. So as not to impede traffic. Often people should not be laid in the isotropic floor cable and pipeline, so as not to impede the passage. The floor has temporarily placed easy to stumble objects (such as steel wire etc.) must set clear warning signs. The ground with a mortar. The mud. Should be promptly removed. To prevent slipping. Common lighting sixteenth production workshop inside and outside the workplace, should ensure sufficient brightness. In a water level gauge, pressure gauge, vacuum gauge, thermometer. The dashboard of various recording instruments. Stairs. Channel