最全面的空压机安装维护手册22047（The most comprehensive air compressor installation and maintenance manual 22047）.docVIP

最全面的空压机安装维护手册22047（The most comprehensive air compressor installation and maintenance manual 22047） The most comprehensive manual for air compressor installation and maintenance Chapter 1 General Provisions The first chapter applies to the installation of reciprocating plug type, screw type, slide type and membrane type volumetric compressors. Second, this is the compressor installation engineering technical specifications, installation engineering general technical requirements, should be in accordance with the provisions of the General Provisions of the implementation. The disassembly and cleaning of the compressor shall comply with the following requirements; A compressor, the whole installation should generally and for the following work; 1 reciprocating piston compressor should be removed piston, connecting rod, valve and filler, and the equipment surface and removed parts and components clean, air valve and filler does not apply steam cleaning; 2, reciprocating piston compressor oil seal oil seal, oil seal is installed in the period stipulated in the technical documents, in addition to the valve, other parts can not wash. 3 screw compressor and sliding vane compressor installed in the equipment technical documents within the time limit of oil seal. Can not wash, have special requirements in accordance with the provisions of the implementation of technical documents; 4, diaphragm compressor should wash siphon cover, diaphragm and suction, exhaust valve. Two, on-site assembly of the compressor should be cleaned, host parts and auxiliary equipment, valves, seals and other packing without the use of steam cleaning, after cleaning should be detergent or water in addition to the net, and check the spare parts and equipment have no defects such as surface damage, the lattice should be coated with a thin layer of oil (parts without contact with the medium without oil lubrication compressor). The second chapter is the compressor which is integrally installed The vertic