电力电子第一章答案（Chapter 1 power electronics）.docVIP

电力电子第一章答案（Chapter 1 power electronics） Chapter 1 power electronics The first chapter, thinking questions and exercises What is the turn-on condition of the 1.1 thyristor? What is the current and the voltage on the load through the thyristor? A: the thyristors turn-on condition is to apply a positive voltage between the anode and anode of the thyristor and to apply a positive trigger voltage and current (or pulse) between the gate and anode. After conduction, the current flowing through thyristor is determined by the load impedance, and the load voltage is determined by the input anode voltage UA. What is the turn off condition of the 1.2 thyristor? How to achieve the thyristor? What is the size of the voltage at the two ends of the thyristor when it is in the blocking state? Answer: the thyristor turn off condition is: to make the thyristor by forward conduction to the blocking state, can be used to reverse the anode voltage of anode current IA decreased, IA decreased to maintain the current is below IH, thyristor internal positive feedback can not be established. Then the thyristor is switched off, and the voltage at both ends is decided by the power supply voltage UA. 1.3 when the temperature increases, how about the trigger current, the positive and negative leakage current, the sustain current, the positive and reverse voltage and the reverse breakdown voltage of the thyristor? Answer: when the temperature rises, the thyristor current decreases with the increase of the temperature, the forward and reverse leakage current increases with the increase of temperature, maintaining the current IH will decrease, forward breakover voltage and reverse breakdown voltage decreases with the increase of the temperature. How many kinds of abnormal conduction modes are there in the 1.4 thyristor? A: the abnormal conduction modes are as follows: (1) Ig=0, the anode voltage rises to a fairly high value; (1) the anode voltage rise rate du/dt is too high; (3) the junction temperat