硬盘低格（Low Level Format）.docVIP

硬盘低格（Low Level Format） It should be noted that, at the previous level of disk read technology, low-level formatting is a lossy operation that has a negative impact on the lifetime of the disk. The last one or two years of hard disk formatting have a much smaller impact because they are not physical operations. Therefore, many hard drive manufacturers are recommended that users cannot but not to, can not be absurd to make this move. When the hard disk is the external magnet, strong magnetic field, or because of the long-term use of sector format magnetic recording disk is lost by low-level formatting is divided out, thus the emergence of a large number of bad sectors, the format to re divide sector. However, the premise is that the disk of the hard disk is not physically scratched. The function of hard disk self formatted hard disk format on the hard disk is the most thorough initialization, after low after the hard disk, the original protection data will be lost, so generally low grid drive is very desirable, only very necessary to lower the hard disk. This so-called necessary when there are two, one is the hard disk before leaving the factory, factory will conduct a low-level format on disk; another is when the hard disk has some type of bad sectors, the use of low-level formatting can play a certain ease or shielding effect. In the first case, needless to say here, because of the hard disk before the grid work hard only engineers will come into contact with, for ordinary users, did not consider this thing. As for the second, what is the type of bad sectors need to self? In the description of this key problem, first look at the type of hard disk. Edit this paragraph causes and role Logical bad sectors In general, bad sectors can be divided into physical and logical bad sectors. The logical bad sectors are relatively easy to solve, it refers to the hard disk by accidental interference during the writing process, caused by ECC error. From the process of speaking, it