装修经验19条（Decoration experience 19）.docVIP

装修经验19条（Decoration experience 19） 1, wall paint construction area and paint dosage estimation method Wall paint construction area = (gross area * 80%-10) * 3 The building area is now the purchase area, the actual utilization rate is generally around 80%, is generally used in kitchen and bathroom tiles, aluminum plate, this part mostly in the area of 10 square, the calculation method of the area including the ceiling, ceiling construction area of wall paint effect is not large, can not be considered (this formula the results may be the most close to the actual area.). Paint quantity: according to the standard construction procedures require primer thickness of 30 microns, the construction area of 5 liters of paint is generally 65-70 flat; recommended thickness topcoat is 60-70 micron, the construction area of 5 liters of paint in general 30-35. The amount of construction area of 83019 70 = primer topcoat; construction area of 83019 35 = amount. 2, in the calculation of engineering quantity of the wall paint, wall area calculation is to the door to the window of the norm, that is to say when the window wall area calculation area removed? Within each industry will have to summarize some experience things from the actual work experience, but these are changing with the changing times, now a total area of the window is larger than the total area. In calculating the use of wall paint, go to the door, no window there is a certain reason, because the material in use will be some loss, and some parts are not convenient to measure. 3, my house, living room and master bedroom window that side is all floor, and at least 6 walls are all furniture, television backdrop is also large. Is it possible to use this formula when calculating the amount of latex paint? Is it better to use the actual measurement area?. Sell latex paint, according to formula is OK, Im afraid Ill buy more. This suggested that measured the actual area, because in no way from the formula deduction. The purchas