关于可编程逻辑控制器外文翻译.doc

　　关于可编程逻辑控制器外文翻译 关于可编程逻辑控制器外文翻译导读：anpanyAEGandthenbyFrenchSchneiderElectric,thecurre Programmable logic controller A programmable logic controller (PLC) or programmable controller is a digital puter used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or lighting fixtures. PLCs are used in many industries and machines. Unlike general-purpose puters, the PLC is designed for multiple inputs and output arrangements, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed or non-volatile memory. A PLC is an example of a real time system since output results must be produced in response to input conditions e, othererican automotive manufacturing industry. Programmable logic controllers otive industry odels changed. Before the PLC, control, sequencing, and safety interlock logic for manufacturing automobiles timers, and drum sequencers and dedicated closed-loop controllers. The process for updating such facilities for the yearly model change-over e consuming and expensive, as electricians needed to individually reatic (the automatic transmission division of General Motors) issued a request for proposal for an electronic replacement for hard-s. The e from Bedford Associates of Bedford, Massachusetts. The first PLC, designated the 084 because it anufacturing, selling, and servicing this nean pany AEG and then by French Schneider Electric, the current oodels built is nooniker at the end of its product range until the 984 made its appearance. The automotive industry is still one of the largest users of PLCs. 2．Development Early PLCs s. These PLCs med in ;ladder logic;, bles a schematic diagram of relay logic. This program notation ands for the existing technicians. Other early PLCs used a form of instruction list programming, based on a stack-based logic solver. Modern PLCs can be pro