先导（Forerunner）.docVIP

先导（Forerunner） The traditional valve of the oil inlet and outlet control is carried out through a valve, two port to openings corresponding to the relationship between the identified early in the design of the valve core processing, in the use of the process can not be changed, so that the independent control flow through the two oil port or pressure can not, do not affect each other. With the decrease of the cost of micro processing controller and sensor and the continuous improvement of control technology, the dual spool control technology is applied in the field of Engineering machinery. British Utronics companies use their own developed technology and patents advantage than double spool valve, has been widely used in JCB, Deere, DAWOO, CASE, excavators, * vehicles, loaders and backhoe loaders and other products. In order to meet the requirement of hydraulic system for Chinese construction machinery products. Stability and automatic control of the continuous improvement, Utronics Chinese timely products to enter the market, has now completed the initial building work (5T) Zhan Yang (8t) loader, excavator prototype debug and entered the testing stage. 1, the defects of the traditional single spool reversing valve It is difficult for the hydraulic system composed of the traditional single spool valve to solve the contradiction between the following functions and the control: (1) the hydraulic system designed to improve system stability, reduce the rate of load change, or sacrifice some of the functions we want to achieve, or additional hydraulic components, such as control valves, pressure control valve, by increasing the damping and improve system speed stiffness to improve the stability of the system. However, the increase of the component will reduce efficiency and waste energy, and reduce the cost and increase the cost of the whole system. (2) as for the special structure allows the user to achieve a particular function must purchase the corresponding hydraulic