塑料模具设计步骤（Plastic mold design steps）.docVIP

塑料模具设计步骤（Plastic mold design steps） Plastic mold design steps I. accepting the assignment The task book for forming plastic parts is usually proposed by the designers of the parts: 1. after the signing of the formal system drawings, and marked with plastic grades, transparency and so on. 2. plastic parts specifications or technical requirements. 3. production output. 4. samples of plastic parts. Usually, the die design task book is made up of the plastic parts and technicians according to the task book of the molding plastic parts. The mould designer designs the mold on the basis of the plastic plastic parts task book and the die design task book. Two collect, analyze and digest the original data Collect and design the parts design, forming process, forming equipment, machining and special processing materials for the design of moulds. 1., digest plastic parts drawings, to understand the use of parts, analysis of plastic parts of the process, size, precision and other technical requirements. For example, plastic parts in appearance, shape, color, transparency, What are the requirements of performance, whether the geometric structure, the inclination and the insert of the plastic parts are reasonable, and whether or not the allowable defects such as weld mark and shrinkage hole can be painted or electroplated, Bonding, drilling and other post-processing. Select the highest dimensional accuracy of plastic parts for analysis to see if the molding tolerances are lower than the tolerances for the plastic parts. In addition, we should also understand the plasticizing and molding process parameters of plastics. 2., digestion process data, analysis of the process task book proposed molding method, equipment type, material specifications, mold structure type requirements are appropriate, can implement?. The forming material should meet the requirements of the strength of the plastic parts, with good flowability, uniformity and isotropy, and thermal stability. According to th