实践日志资料（Practice log data）.docVIP

实践日志资料（Practice log data） Tangyin County in the Chengguan substation monitoring system, we can see the basic components of 110KV main transformer power supply circuit: circuit breaker, partition switch, grounding switch, voltage transformer, current transformer, capacitor, arrester, bus, I specify my understanding of the electrical appliances Circuit breaker: under normal circumstances, control of various power lines and equipment of the beginning and closing, in the power system failure, the automatic removal of the power system short-circuit current, in order to ensure the normal operation of the power system. In this internship, the station used two circuit breakers, 10KV vacuum circuit breakers and 110KV six sulfur hexafluoride circuit breakers. Load switch: the load switch is an electric arc extinguishing device between the breaker and the partition switch. Normally, the opening and closing of switches for various power lines and equipment are controlled. But the short-circuit current can not be switched off. The load switch and the fuse can realize the function of the general breaker. Isolating switch: isolating switch is a kind of high voltage switch equipment. In structure, there is no special arc extinguishing device for isolating switch, so it can not be used to pull load current and short circuit current. The normal separate position, meet the safety requirements of the visible insulation distance between isolating switch ends in the network, the main purposes are: 1, equipment maintenance, isolation switch to isolate the electrical and dielectric parts, formed obvious open breakpoints, to ensure that the working personnel and equipment safety; matched, 2 the isolation switch and circuit breaker of gate operation, to change the mode of operation of system wiring. Its main function is electrical isolation. Earthing switch: when it is used for the maintenance of high voltage line electrical equipment, it is connected with the ground to ensure personal safet