汽车传动系（Automobile transmission system）.docVIP

汽车传动系（Automobile transmission system） Automobile transmission system Fill in the blanks 1., the automobile transmission system is mainly composed of,, and so on. 2. friction plate clutch is basically composed of, and four parts. 3.EQ1090E type manipulation of the automobile transmission to prevent automatic tripping, and self-locking transmission fork shaft; to prevent the automatic jump file, in the two, third and toothholder four, fifth, all with the middle of the lug; with interlocking shaft; to prevent the car hanging down error in gear, reverse gear shifting is arranged on the block. 4., the Dongfeng EQ2080E three axle off-road vehicle has the gear shift, and the relationship between the front axle and the low gear is as follows: the relationship between the front axle and the low gear is as follows:. 5. universal gearing are composed of, such as, and so on. 6. the application of automobile driving system is the most rigid cross shaft type universal joint, which allows the maximum angle for two adjacent. The 7. driving axle is mainly composed of,, and so on. 8. the rotation of a planetary gear refers to revolution. 9., the main reducer in the structure can be divided into single stage main reducer and two-stage main reducer. In general, a single-stage main reducer consists of a pair of double stage master reducers consisting of one pair and one pair. 10. when a car is running, the power of the engine through the clutch, gearbox, universal transmission device to the main reducer, reducer (single) driven bevel gear in turn, the power is transmitted to the drive wheels. The supporting types of the 11. half shafts are divided into two kinds. One end of the axle is connected with each other and the other end is connected. 12., the rear axle housing is used to install, and, and, the basic parts, can generally be divided into and two, the vast majority of cars are used. Two. Explain the terms 1. mark after car model 4 * 2, 4 * 4, 6 * 6 2. driving force 3. transmission