乳化液泵工应知应会18165（The emulsion pump shall be subject to 18165）.docVIP

乳化液泵工应知应会18165（The emulsion pump shall be subject to 18165） 2009-07-11 | emulsion pump industry should be aware of the general provisions 1, emulsion pump operation, the driver must be trained, passed the test and obtained a pass, before you can hold a certificate of operation. 2, emulsion pump station should be equipped with two pumps a box, emulsion pump and emulsion tank should be installed level, emulsion tank position should be higher than the pump body 100 or more. Under normal circumstances, one pump works, one standby or tested. 3. Switches, motors, buttons, junction boxes and other electrical equipment shall be installed in a dry and safe place where there is no shower. If you can not avoid pouring water, it should be properly covered. 4, a motor and a switch location adjacent to the 20? Gas concentration reached 1.5% within the coquettish, must stop operation, cut off the power supply; the gas concentration to be reduced to below 1%, can send electric pump. 5, with automatic distribution device pumping station, to maintain the application of automatic liquid distribution equipment. Water quality should be regularly tested and determined to ensure that the distribution of water clean, comply with the regulations 6, the liquid supply pipeline should be clean and tidy, and ensure the delivery of liquid, back liquid flow 7, the driver should comply with the following requirements for regular inspection and inspection; Keep the oil and dirt 1 times a day; Insist on changing the core of the 1 filter every day; The high pressure control device performance by specialized staff weekly check identification 1; Keep cleaning the filter 1 times every 10 days; Clean the emulsion tank at least 1 times a month; The device is composed of a variety of maintenance staff in charge of monthly check 1; The water quality test 1 times each season; The filter should follow each class 1~2 rotation direction. Preparation, inspection and disposal (1) preparation: Commonly used tools: