四色及网点知识介绍（Four color and dot knowledge）.docVIP

四色及网点知识介绍（Four color and dot knowledge） Printing basic theory - four color and dot knowledge, why should we talk about printing? Not proficient in the process, and how to do a good job in front of printing process, this need not speak more. Four-color printing: As long as the three R+G+B according to the proportion of collision can generate far more than tens of millions of colors. Why black, right, R?. G. Black can be produced when B is equal, but it takes three inks to produce a color, which is not economically viable. In fact, in the process of design, the use of black is very much, this is actually why the use of four-color printing. Another point: RGB generated with black and black ink is directly prepared after compared, the former has a superficial sense, the latter is a heavy feeling. 1., with the four color principle, people are much easier to accept. It is equivalent to the output of four pieces of film, but also equivalent to the PHOTOSHOP inside the channels, cyan, magenta, yellow, black (C, M, Y, K) four channels. The modification of the channel when we process the image is actually a change in the film. 2. mesh dot net angle flat screen and hanging net. Mesh: per square inch, the number of outlets, commonly used printed materials with 175 items, newspapers from 60 to 100 orders, depending on the paper. Special printing has special mesh, depending on the texture. Dot: round. Ellipse。 Rhombus. Square. Diamond shape. FM, dot, etc.. The picture above is made up of round dots. Net angle: the angle at which an angle between a straight line and a horizontal line is formed by the most closely joined dots. Its 45 degrees above Flat screen: the whole piece of film outlets are regularly distributed, and the size of the same, as a plane, there is no sense of hierarchy. Hang the net: dot size is different, net piece has layering feeling. What should I do before outputting the film? First, the format of the document Most of the current output centers adopt Fangzheng