消防小知识（Fire fighting knowledge）.docVIP

消防小知识（Fire fighting knowledge） Composition and principle of fire alarm system and inspection instructions 2009-09-18 11:09:28 source: HC360, editor: LAN [big, small] Generally, automatic fire alarm system consists of two parts: fire detector and fire alarm. Fire detectors are installed on site to monitor fire alarms, fire alarms are installed in fire control centers and all fire detectors are managed. When a fire alarm is detected, a sound light warning signal is sent to notify the duty officer, and some fire alarms can also start the linkage device to extinguish the fire. Some fire detectors are equipped with sound and light alarm devices, which can be used outside the fire alarm and are generally used in families. System composition and principle The fire fighting system can be divided into automatic fire alarm system and linkage system according to function. The function of the former is found after the fire alarm signal, and indicate the fire site, easy to put out; the latter is the function of the automatic fire alarm system is found after the fire, all kinds of equipment start automatically, avoid fire spreading until extinguish fire. From the different functions of the two, we can see that they are inseparable. In fact, there are many automatic fire alarm systems, with the function of automatic linkage system. Generally, automatic fire alarm system consists of two parts: fire detector and fire alarm. Fire detectors are installed on site to monitor fire alarms, fire alarms are installed in fire control centers and all fire detectors are managed. When a fire alarm is detected, a sound light warning signal is sent to notify the duty officer, and some fire alarms can also start the linkage device to extinguish the fire. Some fire detectors are equipped with sound and light alarm devices, which can be used outside the fire alarm and are generally used in families. The principle of fire detector detecting fire is to detect the change of a physical parameter before