特斯拉线圈（Tesla coil）.docVIP

特斯拉线圈（Tesla coil） Let me teach you how to make a small spark gap Tesla coil (SGTC). The height of the coil is about forty centimeters, and the height is related to many factors. Material: (optional material below) 1., a high pressure package, do not ask, such as what type of type of topic, because in theory, any type of high pressure package can be. - high pressure package, in principle, buy high voltage color TV package, the higher the TV set of high voltage package, in theory, the better. 2. diameter 0.25mm enameled wire 200m. Try to use copper, such a small coil, there is no need to use aluminum...... - enameled wire can be purchased at the place where the motor is repaired or in the electronic market. Around one of these, its enough to buy only 10 yuan worth of enameled wire, and the money for a meal is affordable to everyone. 3. diameter 2mm enameled wire three meters. Three meters should be about the same. The same can be done at the place where the motor is repaired or in the electronic marketplace. 4.. A metal ball with a diameter of twelve cm. This can be bought at something that buys an anti-theft window. And its not expensive. In theory, its ten bucks. - the metal ball has a high strength and a smooth surface, so use it as the top of the TC. If there is no ball, you can use a smooth conductive object instead, but the surface area must be the same as the ball with a diameter of 12 cm. 5. diameter 5 cm, 30 cm long, PVC tube one, PVC better, and plexiglass is the most ideal. The place where the pipes are sold may not be sold to you for 30 centimeters. You may only buy a 4 meter long return. However, a five cm in diameter, four meters long tube, the price is about 20 yuan, not expensive. Anyway, its no harm buying more, but you can do something else later. 6.2N3055 triode one. This is three. - 2N3055 is a high power NPN transistor. Some electronic markets have not been sold by 2N3055 because of their earlier times. If not, other high-power NPN tubes can be us