d_link路由器设置（D_link router settings）.docVIP

d_link路由器设置（D_link router settings） D-LINK wireless and wired broadband router quick setting instructions D-LINK wireless and wired broadband router quick setting instructions A: you need to know the configuration information provided by your ISP (broadband provider, such as China Telecom ADSL), and your ISP installation technician will leave this information after connecting Cable or DSL, Modem, and broadband. If you do not have this information yet, please contact your ISP before proceeding with the settings. B: make sure all your network hardware devices are not powered, including routers, PC, Cable, or DSL Modem. C: connect an Ethernet network to your computers Ethernet card, and connect the other end of the line to an Ethernet port of the router (port 1 to 4). D: if there are any other computers to connect to the router, repeat step C. E: connect the routers Internet port WAN port to the LAN port of the Cable or DSL Modem or the Ethernet port using another Ethernet network. The WAN port of the router is the only port that connects to your Modem. Other switches, LAN ports, cannot connect to Cable or DSL Modem. F: turn on the Cable or DSL Modem power, G: plug the 220V terminal of the AC power adapter into the power outlet, and plug the low voltage connector at the other end into the power jack of the router. (note! The working voltage of D-LINK series router is 5V DC please do not take the wrong other power adapter, power adapter router wrong different voltage will damage the router, please check carefully is clearly identified 5V DC power adapter with the router provides the power supply can be switched on, then the wrong router we burned power adapter does not provide warranty service) G: make sure that the POWER power supply, the Internet WAN indicator and the WLAN wireless light are on the front panel. H: you need a computer to configure the router. Please turn on your computers power. Can also configure the router with a wireless network card computer, wirel