弱电（Weak current）.docVIP

弱电（Weak current） Building weak current classification In the construction of weak mainly have two kinds: one is the national security requirements of the voltage level and control voltage of low voltage power, with AC and DC points, such as the 24V DC power supply, emergency lighting or standby power supply. The other is the information source, such as telephone, TV and computer, which contains information such as voice, image, data and so on. narrow sense In narrow sense, building weak current mainly refers to: Security (surveillance, perimeter alarm, parking), fire (Electrical), building control, network cabling and audio systems Difference with strong electricity Strong and weak currents are conceptually easy to distinguish, and the main difference is the difference in uses. Strong electricity is used as a power source, and weak electricity is used for information transmission. They are roughly the same as the following: AC frequency is different The frequency of strong electricity is generally 50Hz (Hz), called power frequency, which means the frequency of industrial power: the frequency of weak current is often high frequency or ultra high frequency, with KHz (kHz) and MHz (MHz) meter. Different transmission mode Strong current is transmitted by power line, and weak current is divided into cable and wireless. The radio is transmitted by electromagnetic wave. Power, voltage and current vary in size Electric power KW (kw) and MW (MW) meter, voltage to V (V), KV (kV), current to A (an), kA (KA); weak power to W (Watts), mW (MW), voltage to V (V), mV (MV), current to mA (MA), uA (a), so the circuit can be formed by printed circuit or integrated circuit. Strong current also has high frequency (hundreds of KHz) and intermediate frequency equipment, but the voltage is higher and the current is larger. Due to the development of modern technology, the weak current has penetrated into the field of high voltage, such as power electronics devices, wireless remote control,