护眼灯（Eye lamp）.docVIP

护眼灯（Eye lamp） Eye lamp Principle of eye: firstly, using variable frequency electronic ballast, power frequency will be increased from 50Hz to 30-50kHz, but due to the change of light afterglow effect phosphor becomes very small, so the human basic feel strobe lights at the same time, using three color phosphors, the soft light, in order to relieve visual fatigue. Using DC ballast, alternating current is converted into direct current, with direct current lighting, and basically no stroboscopic. It can avoid visual fatigue and no electromagnetic interference. Directory 1 best light source 2 basic information 3 principles / classification Electrothermal lamp High frequency lamp? LED desk lamp DC eye lamp 4 hazards Blu ray The electromagnetic signal 5 is difficult to prevent myopia 6 how to pick 7 light pollution 1 the best light editors eyes are developed under natural light. For people, the best source of light is scattered natural light, with the following characteristics: 1, continuous light, in a short period of time without light and shade changes, no stroboscopic. 2, color temperature in 4000 ~ 4600K, color temperature moderate, light soft, with yellow, more suitable for reading needs; color temperature in 4700 ~ 5500K, color temperature is high, light glare white. At dusk, the color temperature of the sun is 2000K-3000K, the color temperature is too low, too yellow; at noon, the temperature of the sun is close to 7000K, the color temperature is too high, too bright, too dazzling. 3, scattered light, light area, no contrast is very strong shadow. 4 continuous spectrum: a combination of visible light in a certain proportion of mixed light, non monochromatic light. 5. direct sunlight and near the window of the natural light is usually very strong (illumination value of several thousands - tens of thousands of Lux), it is not suitable to read and write long hours in this light. The goal of all eye lights is to make the light shine as close to the natural light as po