VC8045A台式数字万用表-AideTek.DOC

VC8045 BENCH TYPE DIGITAL MULTIMETER OPERATION MANUAL I. GENERAL This bench type digital multimeter is a steady performance, 4 1/2 digital multimeter. It uses the LCD with 23mm-high figure to make the reading clear and make operation more convenient. It uses 30mm size LCD with backlight displaying in order to make the reading clear and make operation more convenient. This instrument has the function of measuring DC and AC voltage, DC and AC current, Resistance, Capacitance, Hz, hFE, Diodes and Continuity. For AC measuring, it is performed by high accuracy true rms, has the feature of wide bandwidth measuring and to get accurate rms for AC flow of any any waveform or AC+DC. This instrument adopts double integral A/D converter as its core. It is an ideal tool for labs, factories and radio-technology. II.SAFTY NOTES: The instrument is designed according to IEC1010 standard (safety standard issued by International Electro technical Committee). Please read the following before operation. 2-1. Do not input a value beyond the limited ones when measuring each range. 2-2. The voltage less than 36V is the safe voltage. Please check the connection and insulation of test leads to avoid electric shock when measure the voltage higher than DC36V and AV25V. 2-3. The test leads should be far away the test points when change the function and range. 2-4. Select correct function and range to avoid fault operation. 2-5. Please don’t input voltage value when measuring resistance. 2-6. The test leads should be far away the test points and turn off the power when change the fuse. 2-7. Introduction for safety symbol: “” exists high voltage; “” GND “” dual insulation “” must refer to manual. III. SPECIFIFACTION: 3-1. GENERAL SPECIFICATION： 3-1-1.Displaying：LCD; 3-1-2. Max. display：19999（4 1/2）digit large LCD with back light and auto polarity display; 3-1-3. Measuring way：double integral A/D converter; 3-1-4.Sampleing rate：approx. 3 times/sec; 3-1-5.Over range display: “1”; 3-1-