二阶潮流计算方法.pdfVIP

IEEE Transactions on Power Apparatus and System, Vol. PAS-96, no. 1, JanuaryjFebruary 1977 A SECOND ORDER LOAD FLOW TECHNIQUE M. S. Sachdev T. K. P. Medicherla Power Systems Research Group University of Saskatchewan Saskatoon,Canada ABSTRACT second order terms are estimated and subtracted from the residual vector. The modified residual vector obtained fn This paper presents this manner is thenused to computea new state vector. This a secondorder loadflow technique based on theTaylor series expansion of a multivariable procedure is repeated till the elements of the latest state function. An algorithm for obtainingdigital solutions by the vector are within permissible tolerance of those previously proposed approach is described. Six simplified versions of calculated. The magnitudes and phase angles of bus voltages this algorithm are also discussed. The proposed algorithm a r e thenupdated. The total procedure is then repeated until and its modifications have been tested by obtaining load flow a converged solution is obtained. Six variations of this al- solutions of a fivebussystem,the 26 busSaskatchewan gorithmwerealsoinvestigatedandaredescribedinthis PowerCorporationtransmissi