齿轮油泵安全装置设计及运动仿真.docVIP

任务书 齿轮油泵安全装置设计及运动仿真 1．设计的主要任务及目标 根据齿轮泵的工作原理，并对现有齿轮泵的安全装置进行改良设计以解决齿轮油泵困油现象，增加油泵的安全性。利用三维软件对齿轮油泵的各零件建模，并装配实现运动仿真动画。 2.设计的基本要求和内容 分析课题要求，查阅相关知识方面的论文，拟定开题报告；查找设计题目相关的资料；对设计中的主要参数进行计算；审核分析计算结泵；对修正后的模型进行三维建模及运动仿真并绘制齿轮油泵装配图一张 A1幅面，绘制组成各部件的零件图 ，编写设计说明书一份（约40页 18000字左右） 3.主要参考文献 [1] 《液压传动与气压传动》 [2] 《机械制造基础》 [3] 《机械设计手册》 [4] 其他网络检索到的相关资料 4．进度安排 设计（论文）各阶段名称 起 止 日 期 1 分析课题要求，拟定开题报告 2013.12.1-2013.12.31 2 查找设计题目相关的资料 2014.1.1-2014.3.10 3 对设计中的主要参数进行计算 2014.3.10-2014.4.10 4 对齿轮油泵的主要部件进行三维建模 2014.4.10-2014.5.1 5 对齿轮油泵进行装配及运动仿真 2014.5.1-2014.6.1 齿轮油泵安全装置设计及运动仿真 摘要关键词： Abstract: The gear pump is a volume type hydraulic oil pump to apply in the most widespread situation. It has many merits such as the size slightly, the weight light, the manufacture easy, the work reliable, the price inexpensive, to the fat liquor insensitive, self-absorption ability strong, maintenance convenience and so on. But the vibration and noise problems, that caused by the trapped oil raises pulsation pressure, are more severe, so the gear pump should not be used in the equipment fixed on smooth requirements. It is important to solve trapped oil phenomenon, reduce the noise and the leakage of hydraulic pump end, improve the working pressure and volume efficiency and prolong service life, by changing the design of unloading groove. This paper aims to improve and design the unloading groove, so that the outer meshing gear pump is running in a higher working pressure it will make less noise and more stable work. The improvement measure is great significance to reduce the maintenance of the hydraulic pump and maintenance costs, improve product quality and system operation accuracy, and prolong service life. Key Words: gear pump;trapped oil;unloading groove; flow field simulation 目 录 1 绪 论------------------------------------------------------------1 1.1研究背景和意义-------------------------------------------------------2 1.1.1 国内外研究现状----