多相NiA-lCr合金的微观组织和韧脆转变行为的研究-材料工程.PDF

2 / 2005 11 NiA-l Cr Investigat ion of Microstructure and BDTT for Mult iphase NiA-l Cr Alloy 1, 2 1 2 , , ( 1 , 11201; 2 , 110016) 1, 2 1 2 ZHANG Guang-ye , ZHANG Hua , GU O Jian-ting ( 1 School of Electromechanism Engineering, Hunan U niversity of Science and Technology, Xiangtan 11201, Hunan, China; 2 Institute of Metal Research, Chinese A cademy of Sciences, Shenyang 110016, China) : NiAl-25Cr NiAl-25Cr B-Ni( Al, Cr) , Cc-Ni ( Al, Cr) 3 A-Cr , , , 3~ 5Lm, 2 , ( BDTT) 80K BDT T , B/ Cc, BDTT , , : ; ; ; NiAl : T G 113. 12 : A : 1001- 381( 2005) 11-002 -0 Abstract : T he microstructure and brittle-ductile-transient ( BDT ) for multiphase N iAl-25Cr alloy have been investigated. The microstructure of the tested alloy as-cast includes B-Ni( A l, Cr) , Cc-Ni3 ( A l, Cr) and A-Cr phase. After hot-extruded, the microstructure consists of equiaxed primary B-NiAl w ith mean grain size of 3~ 5Lm and elongated eutectic colonies along the extrusion direction. The results reveal the BDT behavior of the tested alloy is typically dependent on the parameter of strain rate and temperature. A t the temperatures below BDT T, the fracture surfaces are characterized by complete debonding along the B/ Cc interfa