汽车座椅骨架的焊接夹具毕业设计说明书.docVIP

摘 要 一种缸径D为50mm，另一种缸径D为75mmAbstract This thesis is to design welding fixture of automobile seat frame，The positioning of the workpiece clamping quickly, quickly, labor saving, reduces the welding assembly positioning and clamping of the heavy manual labor.In order to ensure the weld size, improve the assembly precision and efficiency, to prevent the deformation of the welding fixture.The realization of mechanization, easy to change rapidly, make the space position of welding conditions into a flat position better welding condition, the improvement of working conditions, but also conducive to improve the quality of the weld.including the overall program, positioning fixture, pneumatic clamping part, finally is the specific folder design. Because the welding fixture, some parts need to be rotated. For welding, when welding two pieces of the best and most powerful position, namely the welding positioner, which can solve this problem, easy welding. This paper firstly analyzes the automobile seat frame welding fixture design the necessity and feasibility; then on the seat frame welding fixture design as the core, through the analysis of structural characteristics of the production line, the automobile welding jig, sums up the design of welding fixture and the step points; focus on the automobile seat frame of welding process analysis, study on the seat fixture clamping position and correct positioning design; through the process of seat frame analysis, design of the substrate, mounting plate, positioning device, clamping mechanism. paper firstly analyzes the automobile seat frame welding fixture design the necessity and feasibility; then on the seat frame welding fixture design as the core, through the analysis of structural characteristics of the production line, the automobile welding jig, sums up the design of welding fixture and the step points; focus on the automobile seat frame of welding process analysis, study on the seat fixture clamping position and correct posi