毕业设计 环境光自适应LED车灯灯光系统设计.doc

本科毕业设计（论文） 环境光自适应LED车灯灯光系统设计 学 院 专 业 年级班别 学 号 学生姓名 指导教师 2010年 6 月 摘 要 伴随全球机动车数量的迅速增长，从汽车自身来看，潜力来自技术创新汽车受到技术人员的重视。 本文首先介绍了现阶段白光LED的发展状况及趋势，接着在阐述照明光学系统以及掌握照明光学系统计算机辅助设计方法的基础上，采用光学系统设计软件ASAP进行LED照明光学系统的设计。根据需求，本文设计了一种可以有效提高单个LED法向光强的照明光学系统，该系统采用旋转抛物面作为反射体，光线追迹结果表明，依据白光LED插入反射体的深度不同，两个法向光强的峰值，半导体照明是一个很有潜力的行业，大功率LED车灯依然是国内外专家研究的焦点，关键词：LED车灯，光学系统，自适应 Abstract Accompanied by the rapid global growth in the number of vehicles，the complex and changing environment of the vehicles has put forward higher requirements to the vehicle safety performance. From the car itself. Increasing the potential for security is from the technological innovation，and the ambient light adaptive technology automotive lighting to improve the contribution made by professional and technical personnel is receiving increasing attention. In this paper，the development status and trends of white LED is first introduced at this stage，Then the lighting optical system in the imaging optical system with the traditional distinction， as well as master the lighting optical system based on computer-aided design methods，the use of optical system design software ASAP optical system for LED lighting design. This article has always revolved around the non-imaging optical system of the core issues, namely, light intensity. Judging from needs of the project, the paper design of a single LED can be an effective method to improve the light intensity of the lighting optical system, the system as a rotating parabolic reflector, ray-tracing results show that，white LED based on the depth of reflector insert